CTC Union IPCAM-8309FW Uživatelský manuál stáhnout pdf (Strana 45)

4.4.7 Alarm Output

When you click Alarm output on the Advance mode menu, the Alarm output setting menu

appears. You can configure the alarm out of I/O port on the rear of the device linked to the

alarm detection and the timer.

Setting

Alarm output：To activate the Alarm output function, select On. The basic setting options are

displayed below. When you do not use the Alarm output function, select Off.

Trigger condition：Select the mode of the Alarm output function. You can choose “Alarm” or

“Timer”.

Alarm:

Controls alarm output by synchronizing with an external sensor input or the built-in activity

detection function.

Motion Detection：Click On to use Motion Detection function as a sensor. You can setup the

motion detection function page.

Note： Motion Detection works only when the Video mode is set to MPEG4 and the

Cropping is set to Off.

Use alarm buffer：Select Use alarm buffer when you forward the image/ audio of before and

after the alarm detection (pre-alarm, post-alarm). If you do not select it, only the image of the

moment of the alarm detection is forwarded. Click Alarm buffer to display the Alarm buffer

setting menu. For details, see “Setting the Alarm Buffer — Alarm buffer setting" Menu page.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52 53

Žádné komentáře

CTC Union IPCAM-8309FW Uživatelský manuál Strana 45