CTC Union SHDSL Uživatelský manuál stáhnout pdf (Strana 38)

Chapter 3. Set-Up

3-14

Click Route to modify the routing

information.

To modify the RIP (Routing information

protocol) Parameters:

RIP Mode: Enable

Auto RIP Summary: Enable

Press Modify

RIP Mode: this parameter determines

how the product handles RIP (Routing

information protocol). RIP allows it to

exchange routing information with other

routers. If set to Disable, the gateway

does not participate in any RIP

exchange with other routers. If set to

Enable, the router broadcasts the

routing table of the router on the LAN

and incoporates RIP broadcast by other routers into it’s routing table. If set silent, the router does

not broadcast the routing table, but it accepts RIP broadcast packets that it receives.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 89 90

Žádné komentáře

CTC Union SHDSL Uživatelský manuál Strana 38